1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Texecom premier elite area help

Discussion in 'Alarms, CCTV & Telephones' started by b21playa, 10 Nov 2021.

  1. b21playa

    b21playa

    Joined:
    18 Feb 2006
    Messages:
    1,528
    Thanks Received:
    14
    Location:
    Birmingham
    Country:
    United Kingdom
    Hi all

    Following on from my last thread I have got my initial setup working fine and now added an additional keypad and door sensor for my shed. I have the house on area A and the shed on B.

    Seems to work fine but the only confusing thing is both keypads can arm both areas even though I’ve set each to their own area and have set local arming/disarming. I have 2 users with different codes for each area as well. It will confuse other users seeing area B full arm.

    Anyone shed any light on this?

    Thanks in advance
     
  2. secureiam

    secureiam

    Joined:
    20 Jun 2014
    Messages:
    5,505
    Thanks Received:
    690
    Location:
    Lancashire
    Country:
    United Kingdom
    What do you need to achieve?

    How is the system being armed?

    A user can't arm an area they don't have access to usually.

    What is in the event log for the process?

    May need a deeper look at the programming

    What panel and version are you on?
     
  3. Sponsored Links
  4. b21playa

    b21playa

    Joined:
    18 Feb 2006
    Messages:
    1,528
    Thanks Received:
    14
    Location:
    Birmingham
    Country:
    United Kingdom
    I’ve got a 64-w running v5.06

    I’ve just tried this after work and seems to be working more like it should of. I can’t arm/disarm an area the user doesn’t have access to but when putting the code for area B into the keypad for area A it does accept the code and get the welcome message. This through me off a bit, not sure it’s just how the system works.
     
  5. sparkymarka

    sparkymarka

    Joined:
    16 Feb 2011
    Messages:
    9,001
    Thanks Received:
    1,372
    Location:
    Sheffield
    Country:
    United Kingdom
    It will work like that ….local arm disarm will turn off that area with the same code when the keypads are set to that area ….example keypad 1 house area A , keypad 2 garage area B …go into house enter 1234 , it turns off house only , go into garage enter 1234 it turns off garage….
     
  6. Sponsored Links
  7. b21playa

    b21playa

    Joined:
    18 Feb 2006
    Messages:
    1,528
    Thanks Received:
    14
    Location:
    Birmingham
    Country:
    United Kingdom
    That makes sense. If I remove local arm/disarm will that make any difference?
     
Loading...

Share This Page