1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Texecom SmartCom ethernet fit in Control Panel.

Discussion in 'Alarms, CCTV & Telephones' started by goodtruth, 30 Nov 2019.

  1. goodtruth

    goodtruth

    Joined:
    30 Oct 2017
    Messages:
    6
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi,

    I'm installing a Texecom Premier Elite 24 Metal control panel and there is loads of room inside to fit in the SmartCom which will be connected via ethernet and NOT WiFi.

    Is there any reason that I should not fit the SmartCom in the control panel?

    Thanks in advance.
     
  2. Sponsored Links
  3. secureiam

    secureiam

    Joined:
    20 Jun 2014
    Messages:
    3,686
    Thanks Received:
    434
    Location:
    Lancashire
    Country:
    United Kingdom
    Not if its hard wired in a metal panel.

    In a poly panel, you can take the yellow unit outside of the smart coms case to make it fit internally, although I know installers that have I personally would do this with a poly panel unless I had no other choice.
     
    • Thanks Thanks x 1
  4. goodtruth

    goodtruth

    Joined:
    30 Oct 2017
    Messages:
    6
    Thanks Received:
    0
    Country:
    United Kingdom
    Thanks a lot Secure I AM. Really appreciate your expertise on this and all the other threads you have helped us out on.
     
Sponsored Links
Loading...

Share This Page