Basically we have too high a water pressure 4-5 bar daytime and need to get a pressure reducer fitted inline before the water softener.
I want to fit this on the leg after the 22mm ball valve going into the softener as this is the least disruptive and does the job.
One of these
https://www.screwfix.com/p/honeywell-home-d04fm-pressure-reducing-valve-22mm-x-22mm/4671j
Now what other bits do I need to connect this. Just been ages since I did this but gut feeling is 22tap to compression then 22mm copper then compression to BSP 22mm male tap?
Pictures attached, it’s the lower horizontal pipe with ball valve I am on about.
Many thanks!
I want to fit this on the leg after the 22mm ball valve going into the softener as this is the least disruptive and does the job.
One of these
https://www.screwfix.com/p/honeywell-home-d04fm-pressure-reducing-valve-22mm-x-22mm/4671j
Now what other bits do I need to connect this. Just been ages since I did this but gut feeling is 22tap to compression then 22mm copper then compression to BSP 22mm male tap?
Pictures attached, it’s the lower horizontal pipe with ball valve I am on about.
Many thanks!