Thermal KV600 for loft conversion cold spots?

Joined
8 Mar 2011
Messages
158
Reaction score
1
Location
London
Country
United Kingdom
We are having a L shaped loft conversion done with wet, between joist, under floor heating. As we are installing carpets (2.2
combined tog) the UFH supplier warned us about heat loss with regards to warm up time performance.

We have 100mm PIR everywhere, but there are lot of battens and two large steels in the ceiling (plaster rests directly against the steel). All of which will act as cold spots, and the steels potentially a thermal bridge :( see images at end. One room is only single brick.

Decorators come in soon, we don’t know if there is a problem or not with UFH performance, but thinking of erring on the side of caution and asking them to install 4mm thermal Wallrock KV600 on external walls and ceilings - we will finish them with Wallrock Premium. The idea is to try and take the edge off the cold spots.

Does anyone have opinions of whether this will help on those cold areas or not? This is less about cost of more heating, but more about ensuring good response times.

A4342D95-6ECB-40A6-9CA3-F2067ADBA154.jpeg
F500AC62-6D06-4798-A20F-F9A5834F8799.jpeg
39E04B03-B796-4922-948D-50619318AF1C.jpeg
 
Sponsored Links
What I think the ufh installers were more warning you about is that using a carpet with a tog of 2.2 means that it will take longer for the room to warm up because the carpet will act as a thermal insulator

Have you spoke to the installers regarding whether insulating the room further will help overcome this ?

The other option is to use a different underlay or carpet to reduce the tog rating
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top