Thoughts on This External Oil Boiler Installation
- Thread starter RBZ5416
- Start date
Very much bodge it and scarper.
Insulation very poorly done should also have been insulated through wall, unless they have moved the condensate trap access to it will be very difficult.
Oil line/fire valve capillary power in scruffy lots of ready made holes in Grant boilers without cutting more plus the cut hole required a grommet.
Should also point out oftec registration is not a legal requirement registering instalation with building control is.
Insulation very poorly done should also have been insulated through wall, unless they have moved the condensate trap access to it will be very difficult.
Oil line/fire valve capillary power in scruffy lots of ready made holes in Grant boilers without cutting more plus the cut hole required a grommet.
Should also point out oftec registration is not a legal requirement registering instalation with building control is.
But they have gone to trouble of cutting down a container to catch it!
Registration is down to installer should be included in price.
That boiler looks like a Grant vortex pro it should be registered with Grant by installer,.
Assuming the installer is Grant G1 registered the boiler warranty will be extended to 10 years .
That's if it's been installed to manufacture instructions and is service annually.
That boiler looks like a Grant vortex pro it should be registered with Grant by installer,.
Assuming the installer is Grant G1 registered the boiler warranty will be extended to 10 years .
That's if it's been installed to manufacture instructions and is service annually.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
