let me start by stating that I have now tiled a few times but I’m on to my most ambitious project yet: full bathroom!
My question: once I’ve planned the tiling and matters such as ensuring there is a reasonably sized tile at top, bottom and edges and also that the tile lines follow through logically to window wall and again, avoid small cuts around window, can I tile out one wall and then move to the next?
I will also set a datum line using a batten above the bath.
Doing the one wall at a time, will help me busy through this I feel
I don’t want to come unstuck despite the initial planning.
Appreciate your help with this
My question: once I’ve planned the tiling and matters such as ensuring there is a reasonably sized tile at top, bottom and edges and also that the tile lines follow through logically to window wall and again, avoid small cuts around window, can I tile out one wall and then move to the next?
I will also set a datum line using a batten above the bath.
Doing the one wall at a time, will help me busy through this I feel
I don’t want to come unstuck despite the initial planning.
Appreciate your help with this