• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Tiling basics. Few questions.

Joined
21 Oct 2014
Messages
1,628
Reaction score
205
Location
West Midlands
Country
United Kingdom
My battening is coming along. Gonna be nipping out to some reclaim yards this week. Looking for “dirty red” clay plain tiles, arris hips, valleys and ridges. Not to worried about getting a good match for the plain tiles, but getting the eaves tiles and tile and a half’s along with the ridges, hips and valleys all matching might be tricky.

I have verges, hips and valleys. Where do I start?

Start at verge so I have a nice alternating full time/tile+half? Then make cuts where it meets valley- never cut less than half a full tile?

Same for starting at a wall. Start there with full tiles/tile+half then cut tiles when it meets hip or valley?

I also have one side with a hip one end and a valley on the other. Where to start there? Middle? One end?

Am I correct in that you never use less than half a full tile? Or bigger?

If the reclaim yard doesn’t know, how do I tell I’m getting the right arris hips? Been told they tend to come in 40 and 45 degrees. My roof is 40.

Help appreciated
 
No reason not to work from the verge , even if it means working left to right.
Hip & valley I would generally work from the hip. not the middle.
cuts , if you need to cut to a half then use a t&h or use a soaker under the cut if t&h are short
 
What do these dirty red ones look like?

IMG_4651.JPG


Anything like those?
 
Those tiles should be in the skip. They are delaminating badly and serve no further purpose as roof tiles. I did note the proliferation of shale remnants, in the images you posted earlier.
 
Those tiles should be in the skip. They are delaminating badly and serve no further purpose as roof tiles. I did note the proliferation of shale remnants, in the images you posted earlier.
I think Ian is trying to flog them to me! I believe he also has a 3 legged dog on a piece of string and sells pegs, lucky heather and tarmac. ;)
 
Those tiles should be in the skip. They are delaminating badly and serve no further purpose as roof tiles. I did note the proliferation of shale remnants, in the images you posted earlier.

Not all bad, second row from back third stack in, seventeenth tile down looks good
 
99p no reserve, they are all the ones that came off in one piece, some good, some not so good.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top