Hi,
New here so please be kind!!
Pulled all the tiles from existing shower cubicle. Old 1/2" plywood backing on stud wall is 'o.k.' but not suitable to re-tile onto, and can't easily be removed. Can I just re-cover with 6mm tile backing board and then re-tile on top. Do not want to use anything thicker as I will run out of shower tray!!
What can I attach the new board with if this is acceptable?
Cheers
New here so please be kind!!
Pulled all the tiles from existing shower cubicle. Old 1/2" plywood backing on stud wall is 'o.k.' but not suitable to re-tile onto, and can't easily be removed. Can I just re-cover with 6mm tile backing board and then re-tile on top. Do not want to use anything thicker as I will run out of shower tray!!
What can I attach the new board with if this is acceptable?
Cheers