tiling round shower tray
- Thread starter dextur
- Start date
Sponsored Links
Hi,
I hope this help with your project?
http://ths.gardenweb.com/forums/bath/msg0221190326385.0209540324534.jpg
I hope this help with your project?
http://ths.gardenweb.com/forums/bath/msg0221190326385.0209540324534.jpg
It's not generally recommended that you start from the bottom and work up, you might end up going out of plumb.
Start with a level batten all the way round half a tile up ( or whatever works out best for cuts top and bottom) start from here, remove batten when dry and cut lower tile to fit, leaving a 1-2mm gap at the bottom.
Start with a level batten all the way round half a tile up ( or whatever works out best for cuts top and bottom) start from here, remove batten when dry and cut lower tile to fit, leaving a 1-2mm gap at the bottom.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
