I've recently moved into a new build with a Danfoss TP9000 programmer, a TS2 remote sensor in the living room and a TP4000 in the main bedroom. As I'm away for work quite regularly so I use the TP9000 holiday mode function. However, I just did an experiment and set the holiday mode to on but found that the TP4000 still functions.
Is that correct? It seems a bit daft to be able to set the hot water and downstairs heating to holiday mode but the upstairs heating will still come on/off while I'm away. Is there a way to modify the system so that holiday mode on the TP9000 switches off both zones? The alternative of course is to remember to manually put the TP4000 into frost protect when I go away and back to normal when I return.
Thanks in advance.
Is that correct? It seems a bit daft to be able to set the hot water and downstairs heating to holiday mode but the upstairs heating will still come on/off while I'm away. Is there a way to modify the system so that holiday mode on the TP9000 switches off both zones? The alternative of course is to remember to manually put the TP4000 into frost protect when I go away and back to normal when I return.
Thanks in advance.