TV Splitter Required ???

Joined
3 Aug 2005
Messages
645
Reaction score
27
Location
Surrey Hills
Country
United Kingdom
I have a single roof aerial. This is to supply two flats with two aerial sockets in each flat (lounge & bedroom) - i.e. 4 TV's in total.

Is this likely to need an ampliufier?

If so what is the best way to set this up? They seem to be powered usually so will need to source power from one or other flat.

Thks,
 
RichA said:
I have a single roof aerial. This is to supply two flats with two aerial sockets in each flat (lounge & bedroom) - i.e. 4 TV's in total.

Is this likely to need an ampliufier?

If so what is the best way to set this up? They seem to be powered usually so will need to source power from one or other flat.

Thks,

powered masthead amplifier is probably best
 
You could buy 2 amps and power one from each flat..

When I lived in a flat, stuff like that and outside lights and the like were powered from a landlord meter i.e neither flat paid for it.
 
4 way signal booster int' loft space or near....coax to each tv, stick an aux plug on each end...bobs ur uncle!
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top