In our old house which we built about 30 years ago we had an immersion heater that could be used two ways. Either to heat half a tank of hot water or heat the whole tank. There was a sort of 'rocker' switch on the top of the tank.
2 years ago we moved and the immersion heater here is on off peak or there is an over ride switch. However whichever way it only heats half the tank. The bottom half is stone cold. The top half is lovely and hot but not enough to fill a bath.
I have asked our plumber and various plumber merchants and they don't seem to know about the 2 way immersion heater. Can you still get these?
If not any suggestions why only the top half is heating up. Fed up with having a bath in a puddle!
2 years ago we moved and the immersion heater here is on off peak or there is an over ride switch. However whichever way it only heats half the tank. The bottom half is stone cold. The top half is lovely and hot but not enough to fill a bath.
I have asked our plumber and various plumber merchants and they don't seem to know about the 2 way immersion heater. Can you still get these?
If not any suggestions why only the top half is heating up. Fed up with having a bath in a puddle!