- Joined
- 3 Aug 2003
- Messages
- 2
- Reaction score
- 0
- Country
I'm going to build up a Hifi Flexi Rack.
B&Q only offer 18mm MDF. Does anyone know of a supplier in the UK for 20mm MDF? Also it would be good if they could cut out (600mmx500mm) shelves, route the edges & drill the holes.
I also need 3 x 2M, M20 threaded rods - I've only found M10 1M threaded rods. Does anyone know of a supplier?
Other stuff I can quite easily get hold of from a local shop are- M20 washers, Acorn Nuts, nuts, rubber washers etc.
I take it to prep MDF you need to degrease it (how do you do this?) sand all sides, wipe dust off, undercoat then paint?
Basically I want it to look like this, just a bit higher..
http://home.adelphia.net/~dbcraw/rack/
I might cover the threaded rods with black piping (or maybe leave bare)
UK based.
Thanks
Nathan
B&Q only offer 18mm MDF. Does anyone know of a supplier in the UK for 20mm MDF? Also it would be good if they could cut out (600mmx500mm) shelves, route the edges & drill the holes.
I also need 3 x 2M, M20 threaded rods - I've only found M10 1M threaded rods. Does anyone know of a supplier?
Other stuff I can quite easily get hold of from a local shop are- M20 washers, Acorn Nuts, nuts, rubber washers etc.
I take it to prep MDF you need to degrease it (how do you do this?) sand all sides, wipe dust off, undercoat then paint?
Basically I want it to look like this, just a bit higher..
http://home.adelphia.net/~dbcraw/rack/
I might cover the threaded rods with black piping (or maybe leave bare)
UK based.
Thanks
Nathan