Underfloor heating control

[rillenkarren]

sorry cut and paste error
http://www.gruenspar.de/honeywell-evohome-gateway-starter-paket-pro.html

what this kit does not mention is how the zones to be controlled report their actual current temp to the control panel, presumably one needs
something like this
http://www.gruenspar.de/honeywell-evohome-funkraumthermostat.html

also it is unclear to me how this fits into the picture, is it used in conjunction with HR92 or as an alternative ?
http://www.gruenspar.de/honeywell-evohome-fussbodenregler-fuer-5-zonen.html

 

[Dan Robinson]

The first link is for old stock. The current version (3) doesn't have the gateway.

You need someone that understands the system.

There are all sorts of combinations of components that could would depending on the environment.

 

[rillenkarren]

ok thanks, i opened a specific evohome thread perhaps someone will latch onto the keywords.

 

[Agile]

Always better to stick to just one thread on any subject as it contains the specific information relating to you.

I lose interest if I need to switch between different threads!

Tony

 

[PullerGas]

Interesting wee thread this; for starters it shows how cr.p the Germans are, not the top notch German engineering. Also, see how theyve used coated copper tube for the UFH. I seen this at the ISH years ago & thought it would take on here, given the lower mean water temperature & other advantages.

Shocking pipe work & a mixture of steel & galv too!!