Here's my issue: There are 2 switches with red indicator lights together on the wall, left from a storage/convector heater which was removed. One is an off-peak switch.
We wish to position the new radiator ( beautiful marble thing ) in front of where these switches are and don't think it would be a good idea to leave them there behind the hot marble, plus I'd rather wire in the new heater than just plug it in.
I am hoping, if there's enough slack, to reposition the switch needed for the new heater about 30cm down the wall, and use the hole from the old position to run the heater cable to the new switch position but I was wondering could the other off-peak switch be safely removed? Right now it's just terminated there, without any appliance connected to it - the red light still switches on ( at night only ).
We wish to position the new radiator ( beautiful marble thing ) in front of where these switches are and don't think it would be a good idea to leave them there behind the hot marble, plus I'd rather wire in the new heater than just plug it in.
I am hoping, if there's enough slack, to reposition the switch needed for the new heater about 30cm down the wall, and use the hole from the old position to run the heater cable to the new switch position but I was wondering could the other off-peak switch be safely removed? Right now it's just terminated there, without any appliance connected to it - the red light still switches on ( at night only ).