Hi. Having a problem with a unswitched FCU to dimmer switch which turns on outside lights. Problem is they wont work.
It is wired as follows. Ring main live and netural to "in" on back of FCU. Neutral out from fcu connected to directly to wiring feeding outside lights. Live from fcu to dimmer switch L1 then from switch line to feed outside lights. I have no lights.
Any ideas where this is going wrong.
I have tested feed in and have 230 volts
It is wired as follows. Ring main live and netural to "in" on back of FCU. Neutral out from fcu connected to directly to wiring feeding outside lights. Live from fcu to dimmer switch L1 then from switch line to feed outside lights. I have no lights.
Any ideas where this is going wrong.
I have tested feed in and have 230 volts