Valliant Turbomax combi boiler problems

Joined
3 Nov 2009
Messages
8
Reaction score
0
Location
Cardiff
Country
United Kingdom
Hi All,

We have just bought a house and we have a Valliant turbomax combi boiler. This boiler hasn't been used for a few months, so I switched it on, and opened up the fill loop (both screws- half turn), but the pressure won't rise, and I end up with the low pressure error on the LCD.

Does anyone have any experience with these boilers?

Cheers
 
Sponsored Links
Joined
25 Jun 2008
Messages
1,037
Reaction score
130
Location
Yorkshire
Country
United Kingdom
take the hose off and open slighty to see if any water comes out could be a faulty valve. then check to see if the valves under the boiler r open. next it could be abit of gunk in the low pressure sensor.

Nath
 
Joined
28 Jan 2005
Messages
34,164
Reaction score
3,139
Location
London
Country
United Kingdom
Try turning back 1 of the screws and fiddle with the second, if that doesn't help, reverse it. A lot of people only use one of the screws and leave the other constant open, so you may have closed the opened one.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Top