My mother had a vinyl floor fitted yesterday, i know with stuff perfection may not be achievable but this stuff look horrendous!
Is it possible to trim it so it fits flush to skirting? This stuff seems lipped up as if its a few mmm too big.
Bubble along all the edges,had used spray adhesive from the overspray on the cladding but non of it is stuck.
Fitted over new floor levelling compound, i did ring shop to ask if it needed to prime it and they said no.
Some corners etc are splits coming out,pattern not matching up on join,and out of square by 30mm per 6ft run so the herringbone not parallel to wall.
Just what i need when new kitchens being fitted on sat.
So question is to experienced people on here is can this be sorted or is the only way to refit new stuff?
Thx
Is it possible to trim it so it fits flush to skirting? This stuff seems lipped up as if its a few mmm too big.
Bubble along all the edges,had used spray adhesive from the overspray on the cladding but non of it is stuck.
Fitted over new floor levelling compound, i did ring shop to ask if it needed to prime it and they said no.
Some corners etc are splits coming out,pattern not matching up on join,and out of square by 30mm per 6ft run so the herringbone not parallel to wall.
Just what i need when new kitchens being fitted on sat.
So question is to experienced people on here is can this be sorted or is the only way to refit new stuff?
Thx
Attachments
-
59244ED0-6296-4FE0-8AD6-0947C8C66C55.jpeg352.8 KB · Views: 44
-
F84224C6-8450-4885-B87F-8326EF22EAE0.jpeg264.4 KB · Views: 40
-
E4078DB6-2FA5-48AB-B6AF-39D898790FB9.jpeg394 KB · Views: 42
-
D76731CD-136C-46A8-83E1-EA489B2E27CF.jpeg362.8 KB · Views: 42
-
0A7E0DFD-8CA0-469A-9EFC-FA78D8EC2EB1.jpeg419.2 KB · Views: 42
-
983049F5-AC00-4FB7-9283-AD5B5328858F.jpeg277.7 KB · Views: 49
-
E482F5BB-41A6-45B2-9FB9-A68D531D90BA.jpeg488.7 KB · Views: 38
-
BF7B8A20-FB6E-4657-A9D2-5D9D1F1C5120.jpeg309.6 KB · Views: 35
-
1C42BAC3-2C57-4332-9844-4E333BE57FEC.jpeg323.1 KB · Views: 55