Due to the sheer weight of all my clothes the pole holding my clothes has collapsed in wardrobe. Shall I buy something which I can attach with bolts to wardrobe sides underneath pole to hold it up. And also might get a metal pole as it's stronger, but dunno where. The wooden one seems to be bending
Wardrobe pole repair
- Thread starter Keitai
- Start date
I think you'll be going some to cut through the bolts with pliers - consider cutting them to length first.
A centre prop from rail to the wardrobe floor would solve the weight issues.
John
A centre prop from rail to the wardrobe floor would solve the weight issues.
John
Buying some is the better option.
Round-headed bolts on the inside will prevent snagging.
The oval metal tubes are very strong.
If you have a modern wardrobe only 500mm deep, and you have man-size jackets and coats on proper hangers, they may not quite fit. If you position the tube a couple of inches more towards the back, they will automatically swivel the hangers when they touch it, so your jackets are hanging slightly diagonally and the door will close.
Round-headed bolts on the inside will prevent snagging.
The oval metal tubes are very strong.
If you have a modern wardrobe only 500mm deep, and you have man-size jackets and coats on proper hangers, they may not quite fit. If you position the tube a couple of inches more towards the back, they will automatically swivel the hangers when they touch it, so your jackets are hanging slightly diagonally and the door will close.
- Joined
- 24 Oct 2020
- Messages
- 7,057
- Reaction score
- 2,606
- Country
I use this steel bar.
Won't bend. Ever.
Rock solid and cheap
www.toolstation.com
Edit. Op posted weeks ago. Oh well. Better late than never
Won't bend. Ever.
Rock solid and cheap
Deta Galvanised Metal Conduit 20mm x 3m | Toolstation
A robust and rigid metal conduit pipe offering a high level of mechanical strength and excellent resistance against corrosion.This 20mm galvanised conduit comes in a length of 3m - it's threaded at both ends, and each length comes with one coupler and one plastic thread protector cap. A tough...
Edit. Op posted weeks ago. Oh well. Better late than never
Last edited:
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
