P
PaulcStead
Hi, recently cleaned out my return filter as the rads were not getting hot at all. This allowed the rads to heat up nicely however, a few days later warm rads again!! I have cleaned the return filter, cleaned the Magna Filter, cleaned out the heat exchanger plate, full system drain and now running Sentinel X400 since Saturday. Rads are balanced and all air is now finally out of the system but still my rads are warm.
Could the controller PCB or the pump be causing the issue? If so, how would i check to confirm this?
Combi boiler is Glow Worm Compact 100e.
Could the controller PCB or the pump be causing the issue? If so, how would i check to confirm this?
Combi boiler is Glow Worm Compact 100e.