Washing Machine Bearings

Joined
13 Nov 2008
Messages
1,270
Reaction score
19
Location
Avon
Country
United Kingdom
Hi,
I am looking to purchase 2 bearings & seal for my Hotpoint Aquaris washing machine.
The model is WMF760

I have supplied 3 photos as ive been told this machine is could be sealed but as you can see it has a ring of bolts around the drum.

I have then been told that these have 30mm or 35mm bearings & cant supply until i take it apart.

Anybody able to advise please.

I have been looking at this two items on ebay but after calling them i didnt get much sense out of them.

https://www.ebay.co.uk/itm/HOTPOINT...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

https://www.ebay.co.uk/itm/Hotpoint...746415?hash=item1c41022eef:g:Uh0AAOSwd4tUEDU9
 

Attachments

  • WM1.jpg
    WM1.jpg
    123.7 KB · Views: 155
  • WM2.jpg
    WM2.jpg
    102.2 KB · Views: 157
  • WM3.jpg
    WM3.jpg
    94.3 KB · Views: 165
Links in this post may contain affiliate links for which DIYnot may be compensated.
Sponsored Links
As you can get your bearings within 24 hrs, Id concentrate on the dismantling of the drum.....not all bearings come out cleanly, sometimes causing damage to the housing and / or the spindle. If all goes well you can then measure up and order.
John :)
 
In an ideal situation that is ok but i have only 3 days to do this and delivery isnt 100% next day etc
 
Sponsored Links
Whenever I used to replace my bearings years ago, I used to buy the complete spider kit as half the time you’d need the spider too. Try a local spares shop if you have one near you.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top