Waste offset

[BobbyBrown]

Hi,

I'm planning on installing a Geberit wall hung frame in place of my existing toilet. The problem I have is that the current toilet is not in the middle of the wall and therefore the waste pipe needs to move 20mm so it's central. What's the best way to achieve this?

 

[just pumps]

McAlpine off set pan connecter?

 

[BobbyBrown]

I’ve looked at that but the wall hung frame already has a pan connector. I need to connect the vertical waste pipe on the frame to the waste pipe in the ground (110mm-110mm I believe)

 

[blup]

From the link the diameter of the vertical pipe looks sufficient to take the offset McAlpine and the flexible rings should fit in the soil pipe. Sometimes dimension are not accurate but I've never had a problem with McApline.

You just need to check the height for the connection is right.

Blup