Hello all, absolute beginner, just looking for some confirmation and guidance. Any is very appreciated.
I have a boiler and underfloor heating downstairs in the kitchen and a hot water cylinder upstairs.
It may be a complete coincidence, but I changed a 2 port valve actuator head for the underfloor downstairs, but recently ive noticed when I turn on the central heating system, the water also gets hot through the taps. I spoke to a plumber he said it will be the 2 port valve upstairs by the cylinder. I was worried I wired the underfloor one wrong somehow and its messing with the others upstairs.
I currently have a Sunvic SZ2301 2 port valve actuator on it by the hot water cylinder. These replacement parts are quite expensive, cheapest ive seen is £80 for the head only.
Could I replace this Sunvic SZ2301 with any motorized actuator head? It looks faily simple a straight forward plug and play with some wiring.
Thank you in advanced
I have a boiler and underfloor heating downstairs in the kitchen and a hot water cylinder upstairs.
It may be a complete coincidence, but I changed a 2 port valve actuator head for the underfloor downstairs, but recently ive noticed when I turn on the central heating system, the water also gets hot through the taps. I spoke to a plumber he said it will be the 2 port valve upstairs by the cylinder. I was worried I wired the underfloor one wrong somehow and its messing with the others upstairs.
I currently have a Sunvic SZ2301 2 port valve actuator on it by the hot water cylinder. These replacement parts are quite expensive, cheapest ive seen is £80 for the head only.
Could I replace this Sunvic SZ2301 with any motorized actuator head? It looks faily simple a straight forward plug and play with some wiring.
Thank you in advanced