Hi All,
I am just about to start a job in a very high end apartment block. One of the first things we need to do is fit a temporary hose tap for the site.
The Landlords Tenants Agreement states that if a hose tap is to be installed, it must be fitted with some kind of valve/meter that will not allow more than 10 litres of continuous flow. Once the 10 litres has been reached it will shut off until manually turned back on again. This is of course to limit the potential for damage to properties below should the tap be accidentally left running.
Does anybody know of such a device? I’ve tried searching online but don’t seem to be getting very far with it.
Any suggestions appreciated.
Thanks in advance.
I am just about to start a job in a very high end apartment block. One of the first things we need to do is fit a temporary hose tap for the site.
The Landlords Tenants Agreement states that if a hose tap is to be installed, it must be fitted with some kind of valve/meter that will not allow more than 10 litres of continuous flow. Once the 10 litres has been reached it will shut off until manually turned back on again. This is of course to limit the potential for damage to properties below should the tap be accidentally left running.
Does anybody know of such a device? I’ve tried searching online but don’t seem to be getting very far with it.
Any suggestions appreciated.
Thanks in advance.