Weather-proof junction box? or better method...

[SPOODZ]

Me again,

Now lighting the conservatory. I have an existing switch next to the patio door that leads to the conservatory, it currently powers the outside PIR light, which is 12ft off the ground directly above the patio doors.

I want take down the PIR light and use the wire for 2 wall lights in the conservatory. Problem is the wire is currently 2ft above the conservatory roof, and only 6" or cable sticks out of the wall.

Is there such thing as a weathrproof junction box I can use to extend the wire down into the conservatory? I want to avoid wire tracing and wrecking plasterwork above the patio doors on the inside.

 

[simon_d]

why dont you out a SFCU with a 3A fuse where you want the switch, and feed it from your new sockets that are on a 13A FCU (see other thread)

 

[industryspark]

spoodz wrote,

Is there such thing as a weathrproof junction box

yes, suitably IP rated one's for outside are very common.

 

[SPOODZ]

simon_d, didnt think of that, I like it though!!

Many thanks for replies - really helpful