I have a Sime 100e boiler which has recently had the divertor valve changed. It has now started blowing the fuse when I run the hot water tap. I know that the safety thermostat got slightly wet during the job - is this the cause of the fault?
What is wrong with my boiler?
- Thread starter richie637
- Start date
who fixed it and how long ago
The DV was replaced Thursday by my plumber and it was running fine until last night? I did notice this morning that the safety thermostat was wet?
So is it worth me changing the s/thermo first?
no u should get the fella who fixed it on thursday.
Ok, thanks very much!
- Joined
- 4 Oct 2005
- Messages
- 555
- Reaction score
- 0
- Country
Could be you have a leak caused by the original repair, sometimes disturbing connections causes others to fail. In any case a small amount of water will have evapourated by now so contact the repairer, if it's not a leak from the diverter valve you may have to pay some more, though a decent fitter may do it free under goodwill.richie637 said:
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
