... or, at the very least, is not a 'DIY' matter!this is not possible and methinks this is trolling
None, because such a design is fundamentally flawed.What size cable is required to feed a consumer unit 30m away from meter, which feeds six independent 10kw electric showers each 4m apart?
A more realistic solution is a stored hot water system, where the water is heated in one or more hot water cylinders - and for 6 showers, those cylinder(s) are likely to be fed from stored cold water, rather than direct from the mains.
Quite so ... but, even if they did, six immersions would require a hell of a lot less electricity that six 10kW electric showers!The question is impossible to answer without a knowledge of the purpose of the showers and the useage. I would assume that six showers would not require 6 cylinders to supply them.
Quite so ... but, even if they did, six immersions would require a hell of a lot less electricity that six 10kW electric showers!
Get a gas boiler
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local