Whirlpool oven Tripped rcb

[dal2274]

Although I was not using the fan oven at the time it tripped the rcb. Since then the oven has not worked, no lights, no timer display and definately no heat or fan.

Would really appreciate some advise, I changed the fuse in the mains plug but that didn't work not sure what else to do.

 

[delmel]

Although I was not using the fan oven at the time it tripped the rcb. Since then the oven has not worked, no lights, no timer display and definately no heat or fan.

Would really appreciate some advise, I changed the fuse in the mains plug but that didn't work not sure what else to do.

Did you check the fuse ( a. That you removed. B that you replaced it with) likely cause may be due to the element blowing, i would expect the light to still work though once powered back on at rcd and mcb or fuse, if only fuses in board did you check that.

 

[Leccy758]

Without the timer module working you would not get a single oven to work (power goes through the module)

Check for wiring fault on supply side