I am trying to install a Vent-Axia Solo Plus extractor fan. It is to replace a old broken fan. From the ceiling I have 4 wires. Red (live), Blue (neutral), Yellow (switched live), and an Earth. In the new extractor fan there is a L & N connection and 5 other connections marked 1,2,3,4,& 5.
I was told to connect the Red wire to L, the Blue wire to N, and the Yellow wire to connection 1, but the fan did not start. There is also a wire loop connecting connections 2 & 3. Obviously I have done something wrong, so if someone could give me some help it woule be appreciated.
I was told to connect the Red wire to L, the Blue wire to N, and the Yellow wire to connection 1, but the fan did not start. There is also a wire loop connecting connections 2 & 3. Obviously I have done something wrong, so if someone could give me some help it woule be appreciated.