Have a new brass 3-switch switch, wrote down where the old ones were but new one has additional holes and now I can't get it to work.
Have a ceiling and 2 wall lights ceiling is OK it is the walls that don't work. Have tried various combination and am now in a muddle so help is required.
Have one red, one black and 2 brown cables coming into the socket, there was then another 2 brown cables that are looped together which were in the terminal holes.
New plug has along the top row
Common, 1way, 2 way, common
bottom row
1way, 2way, common,1way 2way.
Which cables go where so that I can get all 3 lights working.
Many thanks
Have a ceiling and 2 wall lights ceiling is OK it is the walls that don't work. Have tried various combination and am now in a muddle so help is required.
Have one red, one black and 2 brown cables coming into the socket, there was then another 2 brown cables that are looped together which were in the terminal holes.
New plug has along the top row
Common, 1way, 2 way, common
bottom row
1way, 2way, common,1way 2way.
Which cables go where so that I can get all 3 lights working.
Many thanks