Hi, Hope someone can help, so here goes. I have a Zanussi WJD1667W washer/dryer. When I set it to dry clothes, they come out hot and damp. I have read some ideas on this site and done the following. I have cleaned out the condenser bottle at the back, I have also done a code check and ended up with E73, so have changed the thermostat at the top of the heater. It is still the same. The timer seems to start off ok then after 5 mins each minute is about 20 seconds. I have not changed the thermostat at the bottom, near the pump yet, untill I can get some more info. Regards, Mongoose.