has any one used a mechanical hole borer? Can a 4 inch post be knocked into a 4 inch diameter hole satisfactorily? is concrete with a larger hole essential?
I was taught how to put posts in using the traditional method (for hanging farm gates)
Cut turf off,and place to one side.
Dig a hole slightly larger than the size of the post.
Dig the hole deep enough to have half of the above-ground height below ground (i.e. 4' above ground needs 2' deep hole)
Place post in and check for vertical
ALL the soil that came out of the hole gets rammed back in to support the post.
Use turf removed earlier to finish off - job done!
Although it works,I could never really understand how all the soil goes back in the same hole,when you have filled most of it up with a whopping great lump of wood
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local