Worcester 28dci

[andygb1970]

I currently have a Worcester 28dci combi boiler installed at home, and am now getting problems with both the CH and HW.

AT present, i have the thermostat turned off, and the boilers CH dial set for summer. However, when you use the HW, the CH system seems to start working, the rads all get hot! Also, the hot water is not particularly hot, even when set at level 3 on the boiler. I have also noticed that the pressure fluctuates between 2.5 and 3.5 bar, which seems high to me.

Please, has anyone any ideas on what mey be causing these problems?

Thanks for your help.

 

[nickso]

needs a few things looking at. the diverter is passing for a start. you will need a competent engineer to look at it. its not really a job for the diyer.

 

[andygb1970]

Thanks for the reply nickso.

 

[ollski]

was this a special edition worcester for lovers of 'the bill' ?

 

[nickso]

dci worcester of sun hill

 

[clf-gas]

Hello,hello,hello whats goin on ere then.

Be aware anything I type will be given as help and may be used by you to help yourself.

As said the DV, not a huge problem to solve if you have tools, these instuctions, http://www.worcester-bosch.co.uk/index.php?fuseaction=literature.detail&con_id=5058&from_id=5029, oh and patience and three arms.

Use the GC No to order the correct part.

Good luck