So - tonight for some reason, I had the bright idea to bleed my radiators. During bleeding, my boiler pressure dropped below 1 bar (& the fault light started blinking once a second which indicates a lockout, I gather).
So I topped the boiler up back up to 1.5bar. All radiators (except two towel rails) are bled.
However, the boiler won't come out of lockout.
I do not think it is a frozen condensate pipe as the boiler was off all day today until I started bleeding the radiators, so there shouldn't be any frozen water in the condensate pipe, I'd have thought.
I am happy to call out a gas engineer tomorrow if needed, but wondered if it was something simple related to me bleeding the radiators.... Sludge?
Thanks!
So I topped the boiler up back up to 1.5bar. All radiators (except two towel rails) are bled.
However, the boiler won't come out of lockout.
I do not think it is a frozen condensate pipe as the boiler was off all day today until I started bleeding the radiators, so there shouldn't be any frozen water in the condensate pipe, I'd have thought.
I am happy to call out a gas engineer tomorrow if needed, but wondered if it was something simple related to me bleeding the radiators.... Sludge?
Thanks!