Recently had a 30CDI fitted and had a few problems. The installer has been back a couple of times but getting there. A couple of questions if anybody can help.
1 - Can anybody tell me what the boiler temperate should show if set on 5 or 6? I tend to get between late 60 degrees to early 70s but that seems to take a long time to heat the house.
2 - Also - the rads are hot but every so often a couple of them cool (TRVs are fitted) and these are nearest to the boiler - could this be balancing issue?
3 - Finally, I note that I have a TRV fitted in the room where room temp controller is and this is one than goes cool. Hence very rarely gets to room temp so boiler always working. I guess I need to get TVR replaced with open value?
Any help appreciated.
1 - Can anybody tell me what the boiler temperate should show if set on 5 or 6? I tend to get between late 60 degrees to early 70s but that seems to take a long time to heat the house.
2 - Also - the rads are hot but every so often a couple of them cool (TRVs are fitted) and these are nearest to the boiler - could this be balancing issue?
3 - Finally, I note that I have a TRV fitted in the room where room temp controller is and this is one than goes cool. Hence very rarely gets to room temp so boiler always working. I guess I need to get TVR replaced with open value?
Any help appreciated.