Worcester Bosch 280 Divertor valve query

[crispy1664]

Hi there,

From this forum and a little poking and prodding it seems I have a defective divertor valve. Can anyone run me through replacing this? and, would this malfunctioning cause a couple of bleed screws to drip water under the boiler? Also I have been told I nhave a noisy fan, should I replce this and is this difficult?

Many thanks

Jon

 

[kevplumb]

have ypu got the book

 

[ollski]

not too bad, just unplug it from the board drain heating and hot water circuits and remove the expansion vessel. Then there are 2 clips behind the diverter which you need to remove so you can pull it off. Then just replace with new o rings and clips and rewire. A fan replacement is a corgi job.