C
Chris!
Please can anyone advise on what workbench for general DIY would be a sound purchase? For example to trim interior doors, drilling and sawing.
Many thanks in advance!
Many thanks in advance!
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
B
breezer
workmate?
depends on how tidy you are if your like me
at the back of my bench is a band saw a belt sander
so there is no room for a door on it
as breezer say a workmate and matching sawhorse[home made]
for cutting doors
or the even easier way 2ft lenth 4 by 2inch wood
cut a channel 65mm wide 2 inches down from the top 11 inch
from each end cut at an angle one side of about 7% to fit
a wedge in so when the wedge is fitted the chanel will
have parralell sides
you lay the door lenthways into the block on the floor one end
tighten the wedge you know have a secure door with a piece
of wood at the other end of the door on the ground for protection
you can now cut hinge pockets mortices and plain half the door
easily hands free
big all
at the back of my bench is a band saw a belt sander
so there is no room for a door on it
as breezer say a workmate and matching sawhorse[home made]
for cutting doors
or the even easier way 2ft lenth 4 by 2inch wood
cut a channel 65mm wide 2 inches down from the top 11 inch
from each end cut at an angle one side of about 7% to fit
a wedge in so when the wedge is fitted the chanel will
have parralell sides
you lay the door lenthways into the block on the floor one end
tighten the wedge you know have a secure door with a piece
of wood at the other end of the door on the ground for protection
you can now cut hinge pockets mortices and plain half the door
easily hands free
big all
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
