Would anyone mind checking my wiring...

[bigmadandy]

Il try again on Monday. Pressing '0123 R' doesn't seem to do anything, Il re check everything. Last thing to try is the screws int he case of the PIR's. The type I have click together, I looked at the screw on one and it didn't seem to have any effect on the tamper circuit, there is a spring as usual on the front of the PCB and one the case is clicked together this makes the contact. I cant see how the screw would make any odds and I have never put them in before (I'v worked on alarm systems before before but never installed one)

 

[bigmadandy]

Are you entering the user code first? Power the system up, enter the user code (0123) and close all lids on the system. Enter the user code again and press reset and the system should be clear. Wiring looks OK on the bell and keypad.

Power it up with battery or mains or both?

 

[bigmadandy]

Still no joy with this. The LCD just says 'Acenta G3' the whole time and with the battery connected (or mains) I am unable to silence the bell box.

Can anyone suggest anything I could try? I'm getting pretty p'd off with it now :/

Cheers