This boiler is heating koi pond (daft I know) the boiler works fine on a
loop from permanant live to switch live. although reading a previous
post it seems that the pcb is shot with the pump continually running.
the other promblem is with the digital stat there is only putting out 148v
so not enough to run the fan????? P.S. A Corgi plumber is over seeing
the work but is not familiar with this type of system I.E ponds.
loop from permanant live to switch live. although reading a previous
post it seems that the pcb is shot with the pump continually running.
the other promblem is with the digital stat there is only putting out 148v
so not enough to run the fan????? P.S. A Corgi plumber is over seeing
the work but is not familiar with this type of system I.E ponds.