Trying to fit an (Ideal Standard Reflections E476001) bidet, and cannot get a water-tight connection on the underside of the waste - it's almost as if the ceramic casting is uneven - have tightened it as far as I can go, and used various combinations of rubber washers and silicone, but it still weeps!
http://www.ideal-standard.co.uk/homeowner/productcatalogue.aspx?r=39&m=22&s=2#1198
Any advice would be greatly appreciated.
http://www.ideal-standard.co.uk/homeowner/productcatalogue.aspx?r=39&m=22&s=2#1198
Any advice would be greatly appreciated.