Whats wrong in this pic?
- Thread starter ^neo^
- Start date
why use a drillbit when you can just swap the live pin for a neutral one and wire straight into it? 
Bl%%@y Hell! Where's the cable grip 
i am a plumber so have not been electrically trained but as it is turned off i would only class that as AR (at risk) not even ID (immediately dangerous) although it is RIDDOR reportable 
i am a plumber so have not been electrically trained but as it is turned off i would only class that as AR (at risk) not even ID (immediately dangerous) although it is RIDDOR reportable
RIDDOR has some one been hurt
No it's a metal bit and they are drilling into wood ply behind. Just left it there while getting the cordless out
i don't know, i give in.
go on, tell us, whats wrong
go on, tell us, whats wrong
Ah, I see it now... the right hand socket is not the right shape to fit the backbox.. the IP rating is comprimised because the corners are open....
I don't think anyone has to be hurt for it to be reportable under the Reporting of Incidents, Diseases and Dangerous Occurance Regulationsi am a plumber so have not been electrically trained but as it is turned off i would only class that as AR (at risk) not even ID (immediately dangerous) although it is RIDDOR reportable
RIDDOR has some one been hurt
.IIRC this photo is a wind up from some radio operators in the gulf - it has done the rounds a few times!
Look guys, apply common sense,
This is a simple home made single pole Knife Switch where the wooden handle has has yet to be fitted.
This is a simple home made single pole Knife Switch where the wooden handle has has yet to be fitted.
its simply an electric drill!!
I don't think anyone has to be hurt for it to be reportable under the Reporting of Incidents, Diseases and Dangerous Occurance Regulationsi am a plumber so have not been electrically trained but as it is turned off i would only class that as AR (at risk) not even ID (immediately dangerous) although it is RIDDOR reportable
RIDDOR has some one been hurt
IIRC this photo is a wind up from some radio operators in the gulf - it has done the rounds a few times!
I thought you made the report on the fourth day of person being injured. if absent from work.
Unless something nasty has happened
That goes for left hand too
I don't think anyone has to be hurt for it to be reportable under the Reporting of Incidents, Diseases and Dangerous Occurance Regulationsi am a plumber so have not been electrically trained but as it is turned off i would only class that as AR (at risk) not even ID (immediately dangerous) although it is RIDDOR reportable
RIDDOR has some one been hurt
IIRC this photo is a wind up from some radio operators in the gulf - it has done the rounds a few times!
Yeh your right part F.
S**t I've got loads of them to do
Ridiculous. That drill bit is far too big. It is clearly bending the prongs on the fuse holder. Amateurs 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
