done a test today on a ringmain and i dont no if its just my eye sight but the cpc in the 2.5 t+e looked to be 1mm instead of 1.5
and the reading on the end to end on the line to line was 0.43ohms
neutral to neutral was 0.43 ohms
and the earth to earth was 1.04 ohms which i find to be a bit high
any thoughts
and the reading on the end to end on the line to line was 0.43ohms
neutral to neutral was 0.43 ohms
and the earth to earth was 1.04 ohms which i find to be a bit high
any thoughts