Patching Asphalt (Tarmac) Pavement

Joined
15 Jul 2008
Messages
435
Reaction score
2
Country
United Kingdom
I have just installed a new front garden wall and need to repair the damage caused to the asphalt pavement. The area which need re-tarmacing is around 4 metres in length and 0.2 metres in width. A couple of questions on how to undertake the work:

A) Will a couple of bags of cold tarmac and a tamper produce good results?

B) Do I need any other 'filler' product to pour over the tarmac to achieve a nice flat surface?

C) How would I go about bonding the existing tarmac to the new with a straight line (you often see a raised bitumen emulsion line between the two surfaces where repair work has been undertaken)?

D) Should bitumen emulsion be spread around before laying the tarmac on top?

Any other advice in regards to the repair work is very much appreciated :).
 
Sponsored Links
That's great, answered all of my questions other than how to apply the "cold pour" in a straight line between the existing and new macadam? 'Spraying' it from that can doesn't sound like it will produce a straight line?

Also, that 'kit' sounds mighty expensive, no?
 
Does sound expensive, best shop around.

Use a watering can for the cold pour, without the rose attachment of course :)
 
Sponsored Links
Does sound expensive, best shop around.

Use a watering can for the cold pour, without the rose attachment of course :)
That's never going to create a straight line haha. Maybe masking tape and a roller? Or is cold pour too thick to be 'rolled'?
 
Does sound expensive, best shop around.

Use a watering can for the cold pour, without the rose attachment of course :)
That's never going to create a straight line haha. Maybe masking tape and a roller? Or is cold pour too thick to be 'rolled'?

:p Thats what the guys use when repairing the roads..

Anyway bit cheaper here http://www.ebay.co.uk/sch/i.html?_f...&_nkw=tarmac+repair&_sacat=See-All-Categories

Go to 2min 20 secs http://www.youtube.com/watch?v=o7ebuLgZ8Ug&feature=related
 
Links in this post may contain affiliate links for which DIYnot may be compensated.
That's a right mess in that video haha!

If anyone does know of a method to create a neat straight bitumen line, I'd love to hear it :).
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top