Oil pump cross reference, please?

[Burnerman]

Inter 99 burner, fitted with a Danfoss MS11 L3 pump.
Is the direct replacement a BFP11 L3 or a BFP21 L3?
Cheers and good afternoon
John

 

[Terrywookfit]

Either! Just adjust burner feed pipe to suit.
Or make a new one to suit.

 

[Burnerman]

Cheers Terry - 21 it is.
I notice that this pump may have one of three part numbers.....does it matter?
John

 

[denso13]

Good info at http://burner.danfoss.com/dila/dkbgps000a115.pdf, if you haven't already seen it.

 

[Boilerman2]

on an Inter burner the 21L3 is the best replacement - make sure you get a new "Hub Kit" as the old MS11 hub is slightly diffrent!!

 

[Burnerman]

Good info at http://burner.danfoss.com/dila/dkbgps000a115.pdf, if you haven't already seen it.

Strewth, there's some canny bed time reading there......just the job.
Cheers and many thanks
John

 

[Burnerman]

on an Inter burner the 21L3 is the best replacement - make sure you get a new "Hub Kit" as the old MS11 hub is slightly diffrent!!

Thanks for that - I think I've got a few of those inserts around from previous jobs.
21 L it is!
(I've picked up an old 99 for next to nowt, so I thought I'd recondition it as a replacement for mine. There's a good few still in use up here.)
Cheapo B9's are a bit thin on the ground though
Cheers and thanks
John

 

[Boilerman2]

The 99 is a far better burner than the B9 IMHO!
have you thought of joining us on the Oil Heating Forum?? we are looking for new members currently a good bunch of guys look forward to seeing you there!

 

[Burnerman]

I've never really considered something like that - being totally unqualified OFTEC wise, I wouldn't have thought it appropriate
I just like getting stuck in and helping people out.
John

 

[oilhead]

[have you thought of joining us on the Oil Heating Forum?? we are looking for new members currently a good bunch of guys look forward to seeing you there![/quote]
Where is this Oil Heating Forum?