OKIN power chair contol

[wbmkk]

Hi

I am looking for one of these, locally in the UK

There are two bumps on the connector which are used to lock it into place, when joined to the socket.

I have seen similar controls on the internet, but they all show angled sockets ... would they fit ?

The key type thing stops the control unit working if removed ... a nice touch, but not essential.

Does anybody know of a good / cheap supplier please ?

The wire is damaged, not the control unit ... could the wire be fixed, or would that end up more expensive than a new control unit.[/img]

 

[Spark123]

You'll probably find it's easier to contact OKIN for a replacement unit, don't know how much they'll be - probably not cheap but then again, cheaper than using a sub standard unit if it causes an accident.

 

[bernardgreen]

It is often possible to repair the cable if the damage is confined to a short length of the cable and is not close to an end.


It does mean a bulge in the cable but is a lot cheaper than buying a whole new controller.

 

[wbmkk]

It is often possible to repair the cable if the damage is confined to a short length of the cable and is not close to an end.

Yes, the damage is near the plug end, about 4" from the end ... you can see the slight bump on the picture.

 

[Sureitsoff?]

probably quite simple to repair the cable as i assume there are only a few wires in the cable

 

[DetlefSchmitz]

http://www.ebay.co.uk/itm/ELECTRIC-...K_Home_Garden_Other_Sofas&hash=item232b9afa4a