Hello everyone. I have just finished fitting evohome in my house. I tried to follow up guidelines as much as possible but i could not find exact match with instruction provided so I'm hoping someone could have a look and judge if i need any changes to wiring I've done.
Let me start with what I have in my house. Its typical Y plan system with:
boiler Worecaster 24i
3 way motorised walve
pump
cylinder
I was planning to use hot water kit for cylinder and 2 wireless sensors for radiators. I have included wiring diagram of how I fitted evohome into my existing system. As of now it works, no major problems but there is one thing that bothers me. Once in a while a quick flashing blue light on the boiler happens and i wonder why this could be. Maybe wiring error? I fed boiler live from 1 and switched live from 8. My last question is if i should connect both LL together in Wireless Relay box (HTG)
Let me start with what I have in my house. Its typical Y plan system with:
boiler Worecaster 24i
3 way motorised walve
pump
cylinder
I was planning to use hot water kit for cylinder and 2 wireless sensors for radiators. I have included wiring diagram of how I fitted evohome into my existing system. As of now it works, no major problems but there is one thing that bothers me. Once in a while a quick flashing blue light on the boiler happens and i wonder why this could be. Maybe wiring error? I fed boiler live from 1 and switched live from 8. My last question is if i should connect both LL together in Wireless Relay box (HTG)