Condensation in the kitchen - cold water pipe from toilet

Joined
23 May 2015
Messages
45
Reaction score
0
Location
Leeds
Country
United Kingdom
Hi all,

Bit of a mixed one this and I think I know the route of the issue but wanted to see if I’m looking at this all correctly.

In the photo is our kitchen/diner wall. After cooking on Sunday (which was quite a lot of boiling) the wall showed an outline of the cold water pipe behind the plaster which leads to the toilet in the bathroom upstairs.

It’s the first time it’s done this and has done it for the last week when cooking. Therefore I think (bearing in mind the time of year) it’s purely condensation. Adding to this the walls were a light colour until I painted them a dark grey in the summer. So it might have done this before but not been noticeable.

Checking the toilet, it does get a lot of condensation on the cistern which then drips onto the floor a little. The connection of the pipe to the cistern did have a leak around two years ago which doesn’t seem to be present any more. This caused the patch to the top of the wall which only re-appears after cooking as can be seen in the photo of the kitchen wall, so it’s as though there’s still something in the plaster.

I will note in terms of an extractor when cooking, we have one which doesn’t extract to the outside and effectively just re-circulates.

So, I’d like to be corrected if I’m wrong with any of this:
1. There’s little I can do about the pipe condensation behind the plaster, maybe I should re-decorate to a lighter colour?
2. There must be a lack of good ventilation/extraction/air circulation in the kitchen for when we’re cooking currently.
3. To get rid of the condensation on the toilet cistern, I’d need to insulate the inside of the cistern? I’ve seen videos of people doing this with a yoga mat?

Any thoughts on my assessment of it (please don’t be too harsh) would be much appreciated.

P.s - please don’t judge me on the bathroom tiles - previous owner’s choice... not ours!

Many thanks!
 

Attachments

  • A26468A1-5604-4A78-8F2B-8705E4CEF50B.jpeg
    A26468A1-5604-4A78-8F2B-8705E4CEF50B.jpeg
    196.4 KB · Views: 299
  • 6A68AAB4-0CC8-4946-968C-CC04882FB4C6.jpeg
    6A68AAB4-0CC8-4946-968C-CC04882FB4C6.jpeg
    123.3 KB · Views: 301
  • EA5A3633-4113-40B0-BBC2-63C3E7EFB066.jpeg
    EA5A3633-4113-40B0-BBC2-63C3E7EFB066.jpeg
    202.5 KB · Views: 292
Sponsored Links
I will note in terms of an extractor when cooking, we have one which doesn’t extract to the outside and effectively just re-circulates.
Totally useless for any purpose.

There must be a lack of good ventilation/extraction/air circulation in the kitchen
And the bathroom.

The answer is proper ventilation - the kitchen extractor must extract outside, and the bathroom also needs an extractor.
Air must also have somewhere to enter both of those rooms, typically a gap under the door, assuming the rest of the house is not airtight.

Paint and yoga mats are not a solution.
 
As for the bathroom ventilation, this has an extractor which seems to work fine, it’s purely the cold water coming into the cistern into a warmer room surely that’s causing the condensation there?
 
Sponsored Links
How close to the wall surface is the cold pipe, if you put your hand on the wall, can you feel the cold water pipe beneath? If so I'd suggest the cold water supply needs to be chased deeper into the wall
 
Last pic.....I'd suggest the connection to the fill valve is still leaking.
Heat the room up with a fan heater then check again with kitchen roll.
John :)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top