Immersion heater cable connector block

[steveuk1971]

Hi

I need to put a connector block in on an immersion heater cable in an airing cupboard. Worn piece of cable in middle so just want to cut it and connect 2 ends together with a connector block. 3 core cable. Can someone post a link to a suitable connector available on screwfix or toolstation. Many thanks.

 

[chivers67]

https://www.screwfix.com/p/wago-41a-junction-box-grey/7355f - Would need Wagos

https://www.screwfix.com/p/wago-24a-light-junction-box-grey/8423f - Would need Wagos

https://www.screwfix.com/p/debox-24a-in-line-junction-box-white/8692h

https://www.screwfix.com/p/20a-4-terminal-junction-box-white/1239d _ Wouldn't need a connector block

take your pick.

 

[Deleted member 267285]

https://www.screwfix.com/p/wago-41a-junction-box-grey/7355f - Would need Wagos

https://www.screwfix.com/p/wago-24a-light-junction-box-grey/8423f - Would need Wagos

https://www.screwfix.com/p/debox-24a-in-line-junction-box-white/8692h

https://www.screwfix.com/p/20a-4-terminal-junction-box-white/1239d _ Wouldn't need a connector block

take your pick.

Does the amperage rating need to be high? Was going to suggest a 16A one.

 

[chivers67]

I should think 16A should be sufficient

 

[Deleted member 267285]

Screwfix in-line jb (similar to @chivers67 suggestion, slightly dearer for some reason for higher amp rating).