Someone was asking me how they might go about putting an entirely flat side on ~10cm diameter stones/rocks so they sit flat on the ground without rocking. (Not really sure why - some project they're doing).
Anyhow, I'm not entirely sure what equipment they'd need. Presumably the stones/rocks would need to be clamped into some form of bench clamp so they're fixed and then either cut with a pull down saw of some description or some sort of fixed grinder which could be pulled onto each one in a fixed manner.
Anyone any ideas...?
Anyhow, I'm not entirely sure what equipment they'd need. Presumably the stones/rocks would need to be clamped into some form of bench clamp so they're fixed and then either cut with a pull down saw of some description or some sort of fixed grinder which could be pulled onto each one in a fixed manner.
Anyone any ideas...?
Last edited:
