How to cut plinth when floor is out
- Thread starter Gary111
- Start date
-
- Tags
- kitchen fitting
Sponsored Links
Level the floor
If you trim the top off it will not cover where the floor runs out.
Either level the floor, as foxhole says, or scribe the bottom of the board to the shape of the floor.
Depending on the amount of run out this mat simply be done by aligning the top edge correctly and sliding a pencil along the floor.
If the gap is too big place the pencil on a thin, narrow piece of wood to raise it to the correct height. Trim the bottom edge to the pencil line.
Either level the floor, as foxhole says, or scribe the bottom of the board to the shape of the floor.
Depending on the amount of run out this mat simply be done by aligning the top edge correctly and sliding a pencil along the floor.
If the gap is too big place the pencil on a thin, narrow piece of wood to raise it to the correct height. Trim the bottom edge to the pencil line.
Sponsored Links
Seal the bottom edge well or any spillages will soak in and swell the board
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
